|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
January 2007 HYS64T32X00EDL-[25F/.../3.7]-B2 HYS64T64x20EDL-[25F/.../3.7]-B2 HYS64T128x21EDL-[25F/.../3.7]B2 200-Pin SO-DIMM DDR2 SDRAM Modules DDR2 SDRAM RoHs Compliant Products Internet Data Sheet Rev. 1.1 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32X00EDL-[25F/.../3.7]-B2, HYS64T64x20EDL-[25F/.../3.7]-B2, HYS64T128x21EDL-[25F/.../3.7]B2 Revision History: 2007-01, Rev. 1.1 Page All All 4 Subjects (major changes since last revision) Adapted internet edition Updated HYS64T[32/64/128]9xxEDL-[25F/.../3.7](-)B2 Table 2 corrected product string to 21 digits Previous Revision: 2006-10, Rev. 1.0 We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: techdoc@qimonda.com qag_techdoc_rev400 / 3.2 QAG / 2006-08-07 08212006-PKYN-2H1B 2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 1 Overview This chapter gives an overview of the 200-Pin SO-DIMM DDR2 SDRAM Modules product family and describes its main characteristics. 1.1 Features * * * * * * * * * * Programmable self refresh rate via EMRS2 setting Programmable partial array refresh via EMRS2 settings DCC enabling via EMRS2 setting All speed grades faster than DDR2-400 comply with DDR2-400 timing specifications. All inputs and outputs SSTL_1.8 compatible Off-Chip Driver Impedance Adjustment (OCD) and On-Die Termination (ODT) Serial Presence Detect with E2PROM SO-DIMM Dimensions (nominal): 30 mm high, 67.60 mm wide Based on standard reference layouts Raw Card "A", "C","E" RoHS compliant products1) * 200-Pin PC2-6400, PC2-5300 and PC2-4200 DDR2 SDRAM memory modules for use as main memory when installed in systems such as mobile personal computers. * 32M x 64, 64M x 64 and 128M x 64 module organization,and 32M x 16, 64M x 8 chip organization * Standard Double-Data-Rate-Two Synchronous DRAMs (DDR2 SDRAM) with a single + 1.8 V ( 0.1 V) power supply * 256MB, 512MB and 1GB modules built with 512-Mbit DDR2 SDRAMs in PG-TFBGA-60 and PG-TFBGA-84 chipsize packages * Programmable CAS Latencies (3, 4 ,5 and 6), Burst Length (8 & 4) and Burst Type * Auto Refresh (CBR) and Self Refresh TABLE 1 Performance Table Product Type Speed Code Speed Grade Max. Clock Frequency @CL6 @CL5 @CL4 @CL3 Min. RAS-CAS-Delay Min. Row Precharge Time Min. Row Active Time Min. Row Cycle Time -2.5F PC2-6400 5-5-5 -2.5 PC2-6400 6-6-6 400 333 266 200 15 15 45 60 -3 PC2-5300 4-4-4 -- 333 333 200 12 12 45 57 -3S PC2-5300 5-5-5 -- 333 266 200 15 15 45 60 -3.7 PC2-4200 4-4-4 -- 266 266 200 15 15 45 60 Unit -- MHz MHz MHz MHz ns ns ns ns fCK6 fCK5 fCK4 fCK3 tRCD tRP tRAS tRC 400 400 266 200 12.5 12.5 45 57.5 1) RoHS Compliant Product: Restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment as defined in the directive 2002/95/EC issued by the European Parliament and of the Council of 27 January 2003. These substances include mercury, lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated biphenyl ethers. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 3 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 1.2 Description capacitors are mounted on the PCB board. The DIMMs feature serial presence detect based on a serial E2PROM device using the 2-pin I2C protocol. The first 128 bytes are programmed with configuration data and are write protected; the second 128 bytes are available to the customer. The Qimonda HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 module family are small outline DIMM modules "SO-DIMMs" with 30 mm height based on DDR2 technology. DIMMs are available as non-ECC modules in 32M x 64 (256 MB), 64M x 64 (512 MB) and 128M x 64 (1 GB) organization and density, intended for mounting into 200-pin connector sockets. The memory array is designed with 512-Mbit Double-DataRate-Two (DDR2) Synchronous DRAMs. Decoupling TABLE 2 Ordering Information for RoHS Compliant Products Product Type1) PC2-6400 HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 HYS64T64920EDL-25F-B2 HYS64T128021EDL-25FB2 HYS64T128921EDL-25FB2 PC2-6400 HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 HYS64T64920EDL-2.5-B2 HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 PC2-5300 HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 HYS64T64920EDL-3-B2 HYS64T128021EDL-3-B2 HYS64T128921EDL-3-B2 PC2-5300 HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 HYS64T64920EDL-3S-B2 HYS64T128021EDL-3S-B2 HYS64T128921EDL-3S-B2 256 MB 1R x 16 PC2-5300S-555-12-C0 512 MB 2R x 16 PC2-5300S-555-12-A0 1 GB 2R x 8 PC2-5300S-555-12-E0 1 Rank, Non-ECC 2 Rank, Non-ECC 2 Rank, Non-ECC 512 Mbit (x16) 512 Mbit (x16) 512 Mbit (x8) 256 MB 1R x 16 PC2-5300S-444-12-C0 512 MB 2R x 16 PC2-5300S-444-12-A0 1 GB 2R x 8 PC2-5300S-444-12-E0 1 Rank, Non-ECC 2 Rank, Non-ECC 2 Rank, Non-ECC 512 Mbit (x16) 512 Mbit (x16) 512 Mbit (x8) 256 MB 1R x 16 PC2-6400S-666-12-C0 512 MB 2R x 16 PC2-6400S-666-12-A0 1 GB 2R x 8 PC2-6400S-666-12-E0 1 Rank, Non-ECC 2 Rank, Non-ECC 2 Rank, Non-ECC 512 Mbit (x16) 512 Mbit (x16) 512 Mbit (x8) 256 MB 1R x 16 PC2-6400S-555-12-C0 512 MB 2R x 16 PC2-6400S-555-12-A0 1 GB 2R x 8 PC2-6400S-555-12-E0 1 Rank, Non-ECC 2 Rank, Non-ECC 2 Rank, Non-ECC 512 Mbit (x16) 512 Mbit (x16) 512 Mbit (x8) Compliance Code2) Description SDRAM Technology Rev. 1.1, 2007-01 08212006-PKYN-2H1B 4 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type1) PC2-4200 HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 HYS64T64920EDL-3.7-B2 HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 Compliance Code2) Description SDRAM Technology 512 Mbit (x16) 512 Mbit (x16) 512 Mbit (x8) 256 MB 1R x 16 PC2-4200S-444-12-C0 512 MB 2R x 16 PC2-4200S-444-12-A0 1 GB 2R x 8 PC2-4200S-444-12-E0 1 Rank, Non-ECC 2 Rank, Non-ECC 2 Rank, Non-ECC 1) All Product Type numbers end with a place code, designating the silicon die revision. Example: HYS64T64020EDL-3.7-B2, indicating Rev. "B" dies are used for DDR2 SDRAM components. For all Qimonda DDR2 module and component nomenclature see Chapter 6 of this data sheet. 2) The Compliance Code is printed on the module label and describes the speed grade, for example "PC2-4200S-444-12-A0", where 4200S means Small Outlined Unbuffered DIMM modules with 4.26 GB/sec Module Bandwidth and "444-12" means Column Address Strobe (CAS) latency = 4, Row Column Delay (RCD) latency = 4 and Row Precharge (RP) latency = 4 using the latest JEDEC SPD Revision 1.2 and produced on the Raw Card "A". TABLE 3 Address Format DIMM Density 256 MByte 512 MByte 1 GByte Module Organization 32M x 64 64M x 64 128M x 64 Memory Ranks 1 2 2 ECC/ Non-ECC Non-ECC Non-ECC Non-ECC # of SDRAMs # of row/bank/column bits 4 8 16 13/2/10 13/2/10 14/2/10 Raw Card C A E TABLE 4 Components on Modules Product Type1)2) HYS64T32000EDL HYS64T32900EDL HYS64T64020EDL HYS64T64920EDL HYS64T128021EDL HYS64T128921EDL DRAM Components2) HYB18T512160B2F HYB18T512160B2F HYB18T512800B2F DRAM Density 512 Mbit 512 Mbit 512 Mbit DRAM Organisation 32M x 16 32M x 16 64M x 8 1) For a detailed description of all functionalities of the DRAM components on these modules see the component data sheet. 2) Green Product Rev. 1.1, 2007-01 08212006-PKYN-2H1B 5 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 2 2.1 Pin Configurations Chip Configuration The chip configuration of the Small Outline DDR2 SDRAM DIMM is listed by function in Table 2 (200 balls). The abbreviations used in columns Ball and Buffer Type are explained in Table 3 and Table 4 respectively. The Ball numbering is depicted in Figure 1. TABLE 5 Chip Configuration of SO-DIMM Ball No. Clock Signals 30 164 32 166 79 80 CK0 CK1 CK0 CK1 CKE0 CKE1 NC Control Signals 110 115 S0 S1 NC 108 113 109 Address Signals 107 106 85 BA0 BA1 BA2 NC I I I NC SSTL SSTL SSTL SSTL Bank Address Bus 2 Greater than 512Mb DDR2 SDRAMS Less than 1Gb DDR2 SDRAMS Bank Address Bus 2:0 RAS CAS WE I I NC I I I SSTL SSTL -- SSTL SSTL SSTL Not Connected Note: 1-rank module Row Address Strobe Column Address Strobe Write Enable Chip Select Rank 1:0 I I I I I I NC SSTL SSTL SSTL SSTL SSTL SSTL -- Clock Enable Rank 1:0 Note: 2 Ranks module Not Connected Note: 1-rank module Clock Signals 2:0, Complement Clock Signals 2:0 Name Pin Type Buffer Type Function Rev. 1.1, 2007-01 08212006-PKYN-2H1B 6 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Ball No. 102 101 100 99 98 97 94 92 93 91 105 90 89 116 Name A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 AP A11 A12 A13 NC Pin Type I I I I I I I I I I I I I I I NC Buffer Type SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL -- Function Address Bus 12:0 Address Signal 12 Note: Module based on 256 Mbit or larger dies Address Signal 13 Note: 1 Gbit based module Not Connected Note: Module based on 512 Mbit or smaller dies Data Bus 63:0 Note: Data Input/Output Balls Data Signals 5 7 17 19 4 6 14 16 23 25 35 37 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL Rev. 1.1, 2007-01 08212006-PKYN-2H1B 7 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Ball No. 20 22 36 38 43 45 55 57 44 46 56 58 61 63 73 75 62 64 74 76 123 125 135 137 124 126 134 136 141 143 151 153 140 142 152 154 157 159 173 175 Name DQ12 DQ13 DQ14 DQ15 DQ16 DQ17 DQ18 DQ19 DQ20 DQ21 DQ22 DQ23 DQ24 DQ25 DQ26 DQ27 DQ28 DQ29 DQ30 DQ31 DQ32 DQ33 DQ34 DQ35 DQ36 DQ37 DQ38 DQ39 DQ40 DQ41 DQ42 DQ43 DQ44 DQ45 DQ46 DQ47 DQ48 DQ49 DQ50 DQ51 Pin Type I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O Buffer Type SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL Function Data Bus 63:0 Data Input/Output Balls Rev. 1.1, 2007-01 08212006-PKYN-2H1B 8 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Ball No. 158 160 174 176 179 181 189 191 180 182 192 194 Data Strobe Signals 13 11 31 29 51 49 70 68 131 129 148 146 169 167 188 186 Data Mask Signals 10 26 52 67 130 147 170 185 EEPROM 197 Name DQ52 DQ53 DQ54 DQ55 DQ56 DQ57 DQ58 DQ59 DQ60 DQ61 DQ62 DQ63 DQS0 DQS0 DQS1 DQS1 DQS2 DQS2 DQS3 DQS3 DQS4 DQS4 DQS5 DQS5 DQS6 DQS6 DQS7 DQS7 DM0 DM1 DM2 DM3 DM4 DM5 DM6 DM7 SCL Pin Type I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I I I I I I I Buffer Type SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL SSTL CMOS Function Data Bus 63:0 Data Strobe Bus 7:0 Data Mask Bus 7:0 Serial Bus Clock Rev. 1.1, 2007-01 08212006-PKYN-2H1B 9 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Ball No. 195 198 200 Power Supplies 1 199 81,82,87,88,95,96,103,104, 111,112,117,118 Name SDA SA0 SA1 Pin Type I/O I I AI PWR PWR GND Buffer Type OD CMOS CMOS -- -- -- -- Function Serial Bus Data Serial Address Select Bus 2:0 VREF VDDSPD VDD I/O Reference Voltage EEPROM Power Supply Power Supply Ground Plane 2,3,8,9,12,15,18,21,24,27,28, VSS 33,34,39,40,41,42,47,48,53, 54,59,60,65,66,71,72,77,78, 121,122,127,128,132,133,138,13 9,144,145,149,150,155,156, 161,162,165,171,172,177, 178,183,184,187,190,193,196 Other Balls 114 119 ODT0 ODT1 NC 50,69,83,84,120,163,168 NC I I NC NC SSTL SSTL -- -- On-Die Termination Control 1:0 On-Die Termination Control 1 Note: 2 Rank modules Not Connected Note: 1 Rank modules Not connected Rev. 1.1, 2007-01 08212006-PKYN-2H1B 10 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 6 Abbreviations for Ball Type Abbreviation I O I/O AI PWR GND NC Description Standard input-only Ball. Digital levels. Output. Digital levels. I/O is a bidirectional input/output signal. Input. Analog levels. Power Ground Not Connected TABLE 7 Abbreviations for Buffer Type Abbreviation SSTL LV-CMOS CMOS OD Description Serial Stub Terminated Logic (SSTL_18) Low Voltage CMOS CMOS Levels Open Drain. The corresponding ball has 2 operational states, active low and tristate, and allows multiple devices to share as a wire-OR. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 11 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules FIGURE 1 Chip Configuration SO-DIMM (200 Ball) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 12 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 3 3.1 Electrical Characteristics Absolute Maximum Ratings TABLE 8 Absolute Maximum Ratings Caution is needed not to exceed absolute maximum ratings of the DRAM device listed in Table 2 at any time. Symbol Parameter Rating Min. Max. +2.3 +2.3 +2.3 +2.3 Unit Note Storage Temperature -55 +100 1) When VDD and VDDQ and VDDL are less than 500 mV; VREF may be equal to or less than 300 mV. 2) Storage Temperature is the case surface temperature on the center/top side of the DRAM. VDD VDDQ VDDL VIN, VOUT TSTG Voltage on VDD pin relative to VSS Voltage on VDDQ pin relative to VSS Voltage on VDDL pin relative to VSS Voltage on any pin relative to VSS -1.0 -0.5 -0.5 -0.5 V V V V C 1) 1)2) 1)2) 1) 1)2) Attention: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. TABLE 9 DRAM Component Operating Temperature Range Symbol Parameter Rating Min. Max. 95 C 1)2)3)4) Unit Note TOPER Operating Temperature 0 1) Operating Temperature is the case surface temperature on the center / top side of the DRAM. 2) The operating temperature range are the temperatures where all DRAM specification will be supported. During operation, the DRAM case temperature must be maintained between 0 - 95 C under all other specification parameters. 3) Above 85 C the Auto-Refresh command interval has to be reduced to tREFI= 3.9 s 4) When operating this product in the 85 C to 95 C TCASE temperature range, the High Temperature Self Refresh has to be enabled by setting EMR(2) bit A7 to "1". When the High Temperature Self Refresh is enabled there is an increase of IDD6 by approximately 50 % Rev. 1.1, 2007-01 08212006-PKYN-2H1B 13 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 3.2 DC Operating Conditions TABLE 10 Supply Voltage Levels and DC Operating Conditions Parameter Symbol Values Min. Typ. 1.8 1.8 0.5 x VDDQ -- -- -- Max. 1.9 1.9 0.51 x VDDQ 3.6 Unit Note Device Supply Voltage Output Supply Voltage Input Reference Voltage SPD Supply Voltage DC Input Logic High DC Input Logic Low In / Output Leakage Current -5 -- 5 A 1) Under all conditions, VDDQ must be less than or equal to VDD 2) Peak to peak AC noise on VREF may not exceed 2 % VREF (DC).VREF is also expected to track noise in VDDQ. 3) Input voltage for any connector pin under test of 0 V VIN VDDQ + 0.3 V; all other pins at 0 V. Current is per pin VDD VDDQ VREF VDDSPD VIH(DC) VIL (DC) IL 1.7 1.7 0.49 x VDDQ 1.7 V V V V V V -- 1) 2) -- -- -- 3) VREF + 0.125 - 0.30 VDDQ + 0.3 VREF - 0.125 TABLE 11 Operating Conditions Parameter Symbol Values Min. Operating temperature (ambient) DRAM Case Temperature Storage Temperature Barometric Pressure (operating & storage) Operating Humidity (relative) 1) 2) 3) 4) Unit Max. +65 +95 +100 +105 90 C C C kPa % Note TOPR TCASE TSTG PBar 0 0 - 50 +69 10 -- 1)2)3)4) -- 5) HOPR -- DRAM Component Case Temperature is the surface temperature in the center on the top side of any of the DRAMs. Within the DRAM Component Case Temperature Range all DRAM specifications will be supported Above 85 C DRAM Case Temperature the Auto-Refresh command interval has to be reduced to tREFI = 3.9 s When operating this product in the 85 C to 95 C TCASE temperature range, the High Temperature Self Refresh has to be enabled by setting EMR(2) bit A7 to "1". When the High Temperature Self Refresh is enabled there is an increase of IDD6 by approximately 50 %. 5) Up to 3000 m. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 14 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 3.3 Timing Characteristics All Speed grades faster than DDR2-DDR400B comply with DDR2-DDR400B timing specifications(tCK = 5ns with tRAS = 40ns). 3.3.1 Speed Grade Definitions TABLE 12 Speed Grade Definition Speed Bins for DDR2-800 Speed Grade Definition: Table 12 for DDR2-800; Table 13 for DDR2-667 and Table 14 for DDR2-533C. Speed Grade QAG Sort Name CAS-RCD-RP latencies Parameter Clock Frequency @ CL = 3 @ CL = 4 @ CL = 5 @ CL = 6 Row Active Time Row Cycle Time RAS-CAS-Delay Row Precharge Time Symbol DDR2-800D -2.5F 5-5-5 Min. 5 3.75 2.5 2.5 45 57.5 12.5 12.5 Max. 8 8 8 8 70000 -- -- -- DDR2-800E -2.5 6-6-6 Min. 5 3.75 3 2.5 45 60 15 15 Max. 8 8 8 8 70000 -- -- -- Unit Note tCK -- ns ns ns ns ns ns ns ns 1)2)3)4) 1)2)3)4) 1)2)3)4) 1)2)3)4) 1)2)3)4)5) 1)2)3)4) 1)2)3)4) 1)2)3)4) tCK tCK tCK tCK tRAS tRC tRCD tRP 1) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 2) The CK/CK input reference level (for timing reference to CK/CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode. 3) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 4) The output timing reference voltage level is VTT. 5) tRAS.MAX is calculated from the maximum amount of time a DDR2 device can operate without a refresh command which is equal to 9 x tREFI. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 15 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 13 Speed Grade Definition Speed Bins for DDR2-667 Speed Grade QAG Sort Name CAS-RCD-RP latencies Parameter Clock Frequency @ CL = 3 @ CL = 4 @ CL = 5 Row Active Time Row Cycle Time RAS-CAS-Delay Row Precharge Time Symbol DDR2-667C -3 4-4-4 Min. 5 3 3 45 57 12 12 Max. 8 8 8 70000 -- -- -- DDR2-667D -3S 5-5-5 Min. 5 3.75 3 45 60 15 15 Max. 8 8 8 70000 -- -- -- Unit Note tCK -- ns ns ns ns ns ns ns 1)2)3)4) 1)2)3)4) 1)2)3)4) 1)2)3)4)5) 1)2)3)4) 1)2)3)4) 1)2)3)4) tCK tCK tCK tRAS tRC tRCD tRP 1) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 2) The CK/CK input reference level (for timing reference to CK/CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode. 3) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 4) The output timing reference voltage level is VTT. 5) tRAS.MAX is calculated from the maximum amount of time a DDR2 device can operate without a refresh command which is equal to 9 x tREFI. TABLE 14 Speed Grade Definition Speed Bins for DDR2-533C Speed Grade QAG Sort Name CAS-RCD-RP latencies Parameter Clock Frequency @ CL = 3 @ CL = 4 @ CL = 5 Row Active Time Row Cycle Time RAS-CAS-Delay Row Precharge Time Symbol DDR2-533C -3.7 4-4-4 Min. 5 3.75 3.75 45 60 15 15 Max. 8 8 8 70000 -- -- -- Unit Note tCK -- ns ns ns ns ns ns ns 1)2)3)4) 1)2)3)4) 1)2)3)4) 1)2)3)4)5) 1)2)3)4) 1)2)3)4) 1)2)3)4) tCK tCK tCK tRAS tRC tRCD tRP 1) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 2) The CK/CK input reference level (for timing reference to CK/CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode. 3) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 4) The output timing reference voltage level is VTT. 5) tRAS.MAX is calculated from the maximum amount of time a DDR2 device can operate without a refresh command which is equal to 9 x tREFI. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 16 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 3.3.2 Timing Parameters TABLE 15 DRAM Component Timing Parameter by Speed Grade - DDR2-800 Timing Parameters: Table 15 for DDR2-800; Table 16 for DDR2-667 and Table 17 for DDR2-533C. Parameter Symbol DDR2-800 Min. Max. +400 +350 0.52 0.52 8000 -- -- -- -- Unit Note1)2)3)4)5)6)7) 8) DQ output access time from CK / CK tAC DQS output access time from CK / CK tDQSCK Average clock high pulse width tCH.AVG Average clock low pulse width tCL.AVG Average clock period tCK.AVG DQ and DM input setup time tDS.BASE DQ and DM input hold time tDH.BASE Control & address input pulse width for each input tIPW tDIPW DQ and DM input pulse width for each input Data-out high-impedance time from CK / CK tHZ DQS/DQS low-impedance time from CK / CK tLZ.DQS DQ low impedance time from CK/CK tLZ.DQ DQS-DQ skew for DQS & associated DQ signals tDQSQ CK half pulse width tHP DQ hold skew factor DQ/DQS output hold time from DQS Write command to DQS associated clock edges -400 -350 0.48 0.48 2500 50 125 0.6 0.35 -- ps ps 9) 9) 10)11) 10)11) 10)11) 12)13)14) 13)14)15) tCK.AVG tCK.AVG ps ps ps tCK.AVG -- tCK.AVG -- ps ps ps ps ps ps ps nCK 9)16) 9)16) 9)16) 17) 18) tAC.MIN 2 x tAC.MIN -- Min (tCH.ABS, tCL.ABS) -- tAC.MAX tAC.MAX tAC.MAX 200 __ 300 -- + 0.25 -- -- -- -- 0.6 -- -- -- 1.1 0.6 -- -- -- -- tQHS tQH WL 19) 20) tHP - tQHS RL - 1 - 0.25 0.35 0.35 0.2 0.2 0.4 0.35 175 250 0.9 0.4 2 15 WR + tnRP 7.5 -- 21) DQS latching rising transition to associated clock tDQSS edges tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG ps ps tDQSH tDQSL tDSS DQS falling edge to CK setup time DQS falling edge hold time from CK tDSH Write postamble tWPST tWPRE Write preamble Address and control input setup time tIS.BASE Address and control input hold time tIH.BASE Read preamble tRPRE Read postamble tRPST CAS to CAS command delay tCCD tWR Write recovery time Auto-Precharge write recovery + precharge time tDAL Internal write to read command delay tWTR DQS input high pulse width DQS input low pulse width -- -- 21) 21) -- -- 22)23) 23)24) 25)26) 25)27) tCK.AVG tCK.AVG nCK ns nCK ns -- 1) 28)29) 1)30) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 17 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Parameter Symbol DDR2-800 Min. Max. -- -- -- -- -- -- -- -- 12 12 -- Unit Note1)2)3)4)5)6)7) 8) Internal Read to Precharge command delay Exit self-refresh to a non-read command Exit self-refresh to read command Exit precharge power-down to any valid command (other than NOP or Deselect) Exit power down to read command Exit active power-down mode to read command (slow exit, lower power) CKE minimum pulse width ( high and low pulse width) Mode register set command cycle time MRS command to ODT update delay OCD drive mode output delay Minimum time clocks remain ON after CKE asynchronously drops LOW tRTP tXSNR tXSRD tXP tXARD tXARDS tCKE tMRD tMOD tOIT tDELAY 7.5 ns ns nCK nCK nCK nCK nCK nCK ns ns ns 1) 1) tRFC +10 200 2 2 8 - AL 3 2 0 0 -- -- -- -- 31) -- 1) 1) tIS + tCK .AVG + tIH -- 1) For details and notes see the relevant Qimonda component data sheet 2) VDDQ = 1.8 V 0.1V; VDD = 1.8 V 0.1 V. See notes 5)6)7)8) 3) Timing that is not specified is illegal and after such an event, in order to guarantee proper operation, the DRAM must be powered down and then restarted through the specified initialization sequence before normal operation can continue. 4) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 5) The CK / CK input reference level (for timing reference to CK / CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode. 6) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 7) The output timing reference voltage level is VTT. 8) New units, `tCK.AVG` and `nCK`, are introduced in DDR2-667 and DDR2-800. Unit `tCK.AVG` represents the actual tCK.AVG of the input clock under operation. Unit `nCK` represents one clock cycle of the input clock, counting the actual clock edges. Note that in DDR2-400 and DDR2-533, `tCK` is used for both concepts. Example: tXP = 2 [nCK] means; if Power Down exit is registered at Tm, an Active command may be registered at Tm + 2, even if (Tm + 2 - Tm) is 2 x tCK.AVG + tERR.2PER(Min). 9) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tERR(6-10per) of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tERR(6-10PER).MIN = - 272 ps and tERR(6- 10PER).MAX = + 293 ps, then tDQSCK.MIN(DERATED) = tDQSCK.MIN - tERR(6-10PER).MAX = - 400 ps - 293 ps = - 693 ps and tDQSCK.MAX(DERATED) = tDQSCK.MAX - tERR(6-10PER).MIN = 400 ps + 272 ps = + 672 ps. Similarly, tLZ.DQ for DDR2-667 derates to tLZ.DQ.MIN(DERATED) = - 900 ps - 293 ps = - 1193 ps and tLZ.DQ.MAX(DERATED) = 450 ps + 272 ps = + 722 ps. (Caution on the MIN/MAX usage!) 10) Input clock jitter spec parameter. These parameters are referred to as 'input clock jitter spec parameters' and these parameters apply to DDR2-667 and DDR2-800 only. The jitter specified is a random jitter meeting a Gaussian distribution. 11) These parameters are specified per their average values, however it is understood that the relationship between the average timing and the absolute instantaneous timing holds all the times (min. and max of SPEC values are to be used for calculations). 12) Input waveform timing tDS with differential data strobe enabled MR[bit10] = 0, is referenced from the input signal crossing at the VIH.AC level to the differential data strobe crosspoint for a rising signal, and from the input signal crossing at the VIL.AC level to the differential data strobe crosspoint for a falling signal applied to the device under test. DQS, DQS signals must be monotonic between Vil(DC)MAX and Vih(DC)MIN. See Figure 3. 13) If tDS or tDH is violated, data corruption may occur and the data must be re-written with valid data before a valid READ can be executed. 14) These parameters are measured from a data signal ((L/U)DM, (L/U)DQ0, (L/U)DQ1, etc.) transition edge to its respective data strobe signal ((L/U/R)DQS / DQS) crossing. 15) Input waveform timing tDH with differential data strobe enabled MR[bit10] = 0, is referenced from the differential data strobe crosspoint to the input signal crossing at the VIH.DC level for a falling signal and from the differential data strobe crosspoint to the input signal crossing at the VIL.DC level for a rising signal applied to the device under test. DQS, DQS signals must be monotonic between VIL.DC.MAX and VIH.DC.MIN. See Figure 3. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 18 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 16) tHZ and tLZ transitions occur in the same access time as valid data transitions. These parameters are referenced to a specific voltage level which specifies when the device output is no longer driving (tHZ), or begins driving (tLZ) . 17) tDQSQ: Consists of data pin skew and output pattern effects, and p-channel to n-channel variation of the output drivers as well as output slew rate mismatch between DQS / DQS and associated DQ in any given cycle. 18) tHP is the minimum of the absolute half period of the actual input clock. tHP is an input parameter but not an input specification parameter. It is used in conjunction with tQHS to derive the DRAM output timing tQH. The value to be used for tQH calculation is determined by the following equation; tHP = MIN (tCH.ABS, tCL.ABS), where, tCH.ABS is the minimum of the actual instantaneous clock high time; tCL.ABS is the minimum of the actual instantaneous clock low time. 19) tQHS accounts for: 1) The pulse duration distortion of on-chip clock circuits, which represents how well the actual tHP at the input is transferred to the output; and 2) The worst case push-out of DQS on one transition followed by the worst case pull-in of DQ on the next transition, both of which are independent of each other, due to data pin skew, output pattern effects, and pchannel to n-channel variation of the output drivers. 20) tQH = tHP - tQHS, where: tHP is the minimum of the absolute half period of the actual input clock; and tQHS is the specification value under the max column. {The less half-pulse width distortion present, the larger the tQH value is; and the larger the valid data eye will be.} Examples: 1) If the system provides tHP of 1315 ps into a DDR2-667 SDRAM, the DRAM provides tQH of 975 ps minimum. 2) If the system provides tHP of 1420 ps into a DDR2-667 SDRAM, the DRAM provides tQH of 1080 ps minimum. 21) These parameters are measured from a data strobe signal ((L/U/R)DQS / DQS) crossing to its respective clock signal (CK / CK) crossing. The spec values are not affected by the amount of clock jitter applied (i.e. tJIT.PER, tJIT.CC, etc.), as these are relative to the clock signal crossing. That is, these parameters should be met whether clock jitter is present or not. 22) Input waveform timing is referenced from the input signal crossing at the VIH.AC level for a rising signal and VIL.AC for a falling signal applied to the device under test. See Figure 4. 23) These parameters are measured from a command/address signal (CKE, CS, RAS, CAS, WE, ODT, BA0, A0, A1, etc.) transition edge to its respective clock signal (CK / CK) crossing. The spec values are not affected by the amount of clock jitter applied (i.e. tJIT.PER, tJIT.CC, etc.), as the setup and hold are relative to the clock signal crossing that latches the command/address. That is, these parameters should be met whether clock jitter is present or not. 24) Input waveform timing is referenced from the input signal crossing at the VIL.DC level for a rising signal and VIH.DC for a falling signal applied to the device under test. See Figure 4. 25) tRPST end point and tRPRE begin point are not referenced to a specific voltage level but specify when the device output is no longer driving (tRPST), or begins driving (tRPRE). Figure 2 shows a method to calculate these points when the device is no longer driving (tRPST), or begins driving (tRPRE) by measuring the signal at two different voltages. The actual voltage measurement points are not critical as long as the calculation is consistent. 26) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tJIT.PER of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tJIT.PER.MIN = - 72 ps and tJIT.PER.MAX = + 93 ps, then tRPRE.MIN(DERATED) = tRPRE.MIN + tJIT.PER.MIN = 0.9 x tCK.AVG - 72 ps = + 2178 ps and tRPRE.MAX(DERATED) = tRPRE.MAX + tJIT.PER.MAX = 1.1 x tCK.AVG + 93 ps = + 2843 ps. (Caution on the MIN/MAX usage!). 27) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tJIT.DUTY of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tJIT.DUTY.MIN = - 72 ps and tJIT.DUTY.MAX = + 93 ps, then tRPST.MIN(DERATED) = tRPST.MIN + tJIT.DUTY.MIN = 0.4 x tCK.AVG - 72 ps = + 928 ps and tRPST.MAX(DERATED) = tRPST.MAX + tJIT.DUTY.MAX = 0.6 x tCK.AVG + 93 ps = + 1592 ps. (Caution on the MIN/MAX usage!). 28) DAL = WR + RU{tRP(ns) / tCK(ns)}, where RU stands for round up. WR refers to the tWR parameter stored in the MRS. For tRP, if the result of the division is not already an integer, round up to the next highest integer. tCK refers to the application clock period. Example: For DDR2-533 at tCK = 3.75 ns with tWR programmed to 4 clocks. tDAL = 4 + (15 ns / 3.75 ns) clocks = 4 + (4) clocks = 8 clocks. 29) tDAL.nCK = WR [nCK] + tnRP.nCK = WR + RU{tRP [ps] / tCK.AVG[ps] }, where WR is the value programmed in the EMR. 30) tWTR is at lease two clocks (2 x tCK) independent of operation frequency. 31) tCKE.MIN of 3 clocks means CKE must be registered on three consecutive positive clock edges. CKE must remain at the valid input level the entire time it takes to achieve the 3 clocks of registration. Thus, after any CKE transition, CKE may not transition from its valid level during the time period of tIS + 2 x tCK + tIH. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 19 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 16 DRAM Component Timing Parameter by Speed Grade - DDR2-667 Parameter Symbol DDR2-667 Min. Max. +450 +400 0.52 0.52 8000 -- -- -- -- ps ps 9) 9) 10)11) 10)11) Unit Note1)2)3)4)5)6)7) 8) tAC DQS output access time from CK / CK tDQSCK Average clock high pulse width tCH.AVG Average clock low pulse width tCL.AVG Average clock period tCK.AVG DQ and DM input setup time tDS.BASE DQ and DM input hold time tDH.BASE Control & address input pulse width for each input tIPW DQ and DM input pulse width for each input tDIPW Data-out high-impedance time from CK / CK tHZ DQS/DQS low-impedance time from CK / CK tLZ.DQS DQ low impedance time from CK/CK tLZ.DQ DQS-DQ skew for DQS & associated DQ signals tDQSQ CK half pulse width tHP DQ output access time from CK / CK DQ hold skew factor DQ/DQS output hold time from DQS Write command to DQS associated clock edges -450 -400 0.48 0.48 3000 100 175 0.6 0.35 -- tCK.AVG tCK.AVG ps ps ps -- 12)13)14) 13)14)15) tCK.AVG -- tCK.AVG -- ps ps ps ps ps ps ps nCK 9)16) 9)16) 9)16) 17) 18) tAC.MIN 2 x tAC.MIN -- Min (tCH.ABS, tCL.ABS) -- tAC.MAX tAC.MAX tAC.MAX 240 __ 340 -- + 0.25 -- -- -- -- 0.6 -- -- -- 1.1 0.6 -- -- -- -- -- -- -- tQHS tQH WL 19) 20) tHP - tQHS RL-1 - 0.25 0.35 0.35 0.2 0.2 0.4 0.35 200 275 0.9 0.4 2 15 WR + tnRP 7.5 7.5 -- 21) DQS latching rising transition to associated clock tDQSS edges tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG tCK.AVG ps ps tDQSH tDQSL DQS falling edge to CK setup time tDSS DQS falling edge hold time from CK tDSH Write postamble tWPST Write preamble tWPRE Address and control input setup time tIS.BASE Address and control input hold time tIH.BASE Read preamble tRPRE Read postamble tRPST CAS to CAS command delay tCCD tWR Write recovery time Auto-Precharge write recovery + precharge time tDAL Internal write to read command delay tWTR Internal Read to Precharge command delay tRTP Exit self-refresh to a non-read command tXSNR Exit self-refresh to read command tXSRD DQS input high pulse width DQS input low pulse width -- -- 21) 21) -- -- 22)23) 23)24) 25)26) 25)27) tCK.AVG tCK.AVG nCK ns nCK ns ns ns nCK -- 1) 28)29) 1)30) 1) 1) tRFC +10 200 -- Rev. 1.1, 2007-01 08212006-PKYN-2H1B 20 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Parameter Symbol DDR2-667 Min. Max. -- -- -- -- -- 12 12 -- Unit Note1)2)3)4)5)6)7) 8) Exit precharge power-down to any valid command (other than NOP or Deselect) Exit power down to read command Exit active power-down mode to read command (slow exit, lower power) CKE minimum pulse width ( high and low pulse width) Mode register set command cycle time MRS command to ODT update delay OCD drive mode output delay Minimum time clocks remain ON after CKE asynchronously drops LOW tXP tXARD tXARDS tCKE tMRD tMOD tOIT tDELAY 2 2 7 - AL 3 2 0 0 nCK nCK nCK nCK nCK ns ns ns -- -- -- 31) -- 1) 1) tIS + tCK .AVG + tIH -- 1) For details and notes see the relevant Qimonda component data sheet 2) VDDQ = 1.8 V 0.1V; VDD = 1.8 V 0.1 V. See notes 5)6)7)8) 3) Timing that is not specified is illegal and after such an event, in order to guarantee proper operation, the DRAM must be powered down and then restarted through the specified initialization sequence before normal operation can continue. 4) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 5) The CK / CK input reference level (for timing reference to CK / CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode. 6) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 7) The output timing reference voltage level is VTT. 8) New units, `tCK.AVG` and `nCK`, are introduced in DDR2-667 and DDR2-800. Unit `tCK.AVG` represents the actual tCK.AVG of the input clock under operation. Unit `nCK` represents one clock cycle of the input clock, counting the actual clock edges. Note that in DDR2-400 and DDR2-533, `tCK` is used for both concepts. Example: tXP = 2 [nCK] means; if Power Down exit is registered at Tm, an Active command may be registered at Tm + 2, even if (Tm + 2 - Tm) is 2 x tCK.AVG + tERR.2PER(Min). 9) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tERR(6-10per) of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tERR(6-10PER).MIN = - 272 ps and tERR(6- 10PER).MAX = + 293 ps, then tDQSCK.MIN(DERATED) = tDQSCK.MIN - tERR(6-10PER).MAX = - 400 ps - 293 ps = - 693 ps and tDQSCK.MAX(DERATED) = tDQSCK.MAX - tERR(6-10PER).MIN = 400 ps + 272 ps = + 672 ps. Similarly, tLZ.DQ for DDR2-667 derates to tLZ.DQ.MIN(DERATED) = - 900 ps - 293 ps = - 1193 ps and tLZ.DQ.MAX(DERATED) = 450 ps + 272 ps = + 722 ps. (Caution on the MIN/MAX usage!) 10) Input clock jitter spec parameter. These parameters are referred to as 'input clock jitter spec parameters' and these parameters apply to DDR2-667 and DDR2-800 only. The jitter specified is a random jitter meeting a Gaussian distribution. 11) These parameters are specified per their average values, however it is understood that the relationship between the average timing and the absolute instantaneous timing holds all the times (min. and max of SPEC values are to be used for calculations). 12) Input waveform timing tDS with differential data strobe enabled MR[bit10] = 0, is referenced from the input signal crossing at the VIH.AC level to the differential data strobe crosspoint for a rising signal, and from the input signal crossing at the VIL.AC level to the differential data strobe crosspoint for a falling signal applied to the device under test. DQS, DQS signals must be monotonic between Vil(DC)MAX and Vih(DC)MIN. See Figure 3. 13) If tDS or tDH is violated, data corruption may occur and the data must be re-written with valid data before a valid READ can be executed. 14) These parameters are measured from a data signal ((L/U)DM, (L/U)DQ0, (L/U)DQ1, etc.) transition edge to its respective data strobe signal ((L/U/R)DQS / DQS) crossing. 15) Input waveform timing tDH with differential data strobe enabled MR[bit10] = 0, is referenced from the differential data strobe crosspoint to the input signal crossing at the VIH.DC level for a falling signal and from the differential data strobe crosspoint to the input signal crossing at the VIL.DC level for a rising signal applied to the device under test. DQS, DQS signals must be monotonic between VIL.DC.MAX and VIH.DC.MIN. See Figure 3. 16) tHZ and tLZ transitions occur in the same access time as valid data transitions. These parameters are referenced to a specific voltage level which specifies when the device output is no longer driving (tHZ), or begins driving (tLZ) . 17) tDQSQ: Consists of data pin skew and output pattern effects, and p-channel to n-channel variation of the output drivers as well as output slew rate mismatch between DQS / DQS and associated DQ in any given cycle. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 21 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 18) tHP is the minimum of the absolute half period of the actual input clock. tHP is an input parameter but not an input specification parameter. It is used in conjunction with tQHS to derive the DRAM output timing tQH. The value to be used for tQH calculation is determined by the following equation; tHP = MIN (tCH.ABS, tCL.ABS), where, tCH.ABS is the minimum of the actual instantaneous clock high time; tCL.ABS is the minimum of the actual instantaneous clock low time. 19) tQHS accounts for: 1) The pulse duration distortion of on-chip clock circuits, which represents how well the actual tHP at the input is transferred to the output; and 2) The worst case push-out of DQS on one transition followed by the worst case pull-in of DQ on the next transition, both of which are independent of each other, due to data pin skew, output pattern effects, and pchannel to n-channel variation of the output drivers. 20) tQH = tHP - tQHS, where: tHP is the minimum of the absolute half period of the actual input clock; and tQHS is the specification value under the max column. {The less half-pulse width distortion present, the larger the tQH value is; and the larger the valid data eye will be.} Examples: 1) If the system provides tHP of 1315 ps into a DDR2-667 SDRAM, the DRAM provides tQH of 975 ps minimum. 2) If the system provides tHP of 1420 ps into a DDR2-667 SDRAM, the DRAM provides tQH of 1080 ps minimum. 21) These parameters are measured from a data strobe signal ((L/U/R)DQS / DQS) crossing to its respective clock signal (CK / CK) crossing. The spec values are not affected by the amount of clock jitter applied (i.e. tJIT.PER, tJIT.CC, etc.), as these are relative to the clock signal crossing. That is, these parameters should be met whether clock jitter is present or not. 22) Input waveform timing is referenced from the input signal crossing at the VIH.AC level for a rising signal and VIL.AC for a falling signal applied to the device under test. See Figure 4. 23) These parameters are measured from a command/address signal (CKE, CS, RAS, CAS, WE, ODT, BA0, A0, A1, etc.) transition edge to its respective clock signal (CK / CK) crossing. The spec values are not affected by the amount of clock jitter applied (i.e. tJIT.PER, tJIT.CC, etc.), as the setup and hold are relative to the clock signal crossing that latches the command/address. That is, these parameters should be met whether clock jitter is present or not. 24) Input waveform timing is referenced from the input signal crossing at the VIL.DC level for a rising signal and VIH.DC for a falling signal applied to the device under test. See Figure 4. 25) tRPST end point and tRPRE begin point are not referenced to a specific voltage level but specify when the device output is no longer driving (tRPST), or begins driving (tRPRE). Figure 2 shows a method to calculate these points when the device is no longer driving (tRPST), or begins driving (tRPRE) by measuring the signal at two different voltages. The actual voltage measurement points are not critical as long as the calculation is consistent. 26) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tJIT.PER of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tJIT.PER.MIN = - 72 ps and tJIT.PER.MAX = + 93 ps, then tRPRE.MIN(DERATED) = tRPRE.MIN + tJIT.PER.MIN = 0.9 x tCK.AVG - 72 ps = + 2178 ps and tRPRE.MAX(DERATED) = tRPRE.MAX + tJIT.PER.MAX = 1.1 x tCK.AVG + 93 ps = + 2843 ps. (Caution on the MIN/MAX usage!). 27) When the device is operated with input clock jitter, this parameter needs to be derated by the actual tJIT.DUTY of the input clock. (output deratings are relative to the SDRAM input clock.) For example, if the measured jitter into a DDR2-667 SDRAM has tJIT.DUTY.MIN = - 72 ps and tJIT.DUTY.MAX = + 93 ps, then tRPST.MIN(DERATED) = tRPST.MIN + tJIT.DUTY.MIN = 0.4 x tCK.AVG - 72 ps = + 928 ps and tRPST.MAX(DERATED) = tRPST.MAX + tJIT.DUTY.MAX = 0.6 x tCK.AVG + 93 ps = + 1592 ps. (Caution on the MIN/MAX usage!). 28) DAL = WR + RU{tRP(ns) / tCK(ns)}, where RU stands for round up. WR refers to the tWR parameter stored in the MRS. For tRP, if the result of the division is not already an integer, round up to the next highest integer. tCK refers to the application clock period. Example: For DDR2-533 at tCK = 3.75 ns with tWR programmed to 4 clocks. tDAL = 4 + (15 ns / 3.75 ns) clocks = 4 + (4) clocks = 8 clocks. 29) tDAL.nCK = WR [nCK] + tnRP.nCK = WR + RU{tRP [ps] / tCK.AVG[ps] }, where WR is the value programmed in the EMR. 30) tWTR is at lease two clocks (2 x tCK) independent of operation frequency. 31) tCKE.MIN of 3 clocks means CKE must be registered on three consecutive positive clock edges. CKE must remain at the valid input level the entire time it takes to achieve the 3 clocks of registration. Thus, after any CKE transition, CKE may not transition from its valid level during the time period of tIS + 2 x tCK + tIH. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 22 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules FIGURE 2 Method for calculating transitions and endpoint FIGURE 3 Differential input waveform timing - tDS and tDS FIGURE 4 Differential input waveform timing - tlS and tlH Rev. 1.1, 2007-01 08212006-PKYN-2H1B 23 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 17 DRAM Component Timing Parameter by Speed Grade - DDR2-533 Parameter Symbol DDR2-533 Min. DQ output access time from CK / CK CAS A to CAS B command period CK, CK high-level width CKE minimum high and low pulse width CK, CK low-level width Auto-Precharge write recovery + precharge time Minimum time clocks remain ON after CKE asynchronously drops LOW DQ and DM input hold time (differential data strobe) Max. +500 -- 0.55 -- 0.55 -- -- -- -- -- +450 -- 300 + 0.25 -- -- -- -- ps -- -- -- -- -- 8)18) Unit Note1)2)3)4)5) 6)7) tAC tCCD tCH tCKE tCL tDAL tDELAY tDH (base) -500 2 0.45 3 0.45 WR + tRP tCK tCK tCK tCK tCK ns ps ps tIS + tCK + tIH 225 -25 0.35 -450 0.35 -- - 0.25 100 -25 0.2 0.2 MIN. (tCL, tCH) -- 375 0.6 250 2 x tAC.MIN 9) 10) DQ and DM input hold time (single ended data tDH1 (base) strobe) DQ and DM input pulse width (each input) DQS output access time from CK / CK DQS input low (high) pulse width (write cycle) DQS-DQ skew (for DQS & associated DQ signals) Write command to 1st DQS latching transition DQ and DM input setup time (differential data strobe) 11) tDIPW tDQSCK tDQSL,H tDQSQ tDQSS tDS (base) tCK ps -- -- -- 11) tCK ps tCK ps ps -- 11) DQ and DM input setup time (single ended data tDS1 (base) strobe) DQS falling edge hold time from CK (write cycle) Clock half period Data-out high-impedance time from CK / CK Address and control input hold time Address and control input pulse width (each input) Address and control input setup time DQ low-impedance time from CK / CK DQS low-impedance from CK / CK Mode register set command cycle time OCD drive mode output delay Data output hold time from DQS Data hold skew factor 11) tDSH tCK tCK ps ps -- -- 12) 13) 11) DQS falling edge to CK setup time (write cycle) tDSS tHP tHZ tIH(base) tIPW tIS(base) tLZ(DQ) tLZ(DQS) tMRD tOIT tQH tQHS tAC.MAX -- -- -- tCK ps ps ps -- 11) 14) 14) tAC.MIN 2 0 tAC.MAX tAC.MAX -- 12 -- 400 tCK ns ps -- -- -- -- tHP -tQHS -- Rev. 1.1, 2007-01 08212006-PKYN-2H1B 24 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Parameter Symbol DDR2-533 Min. Max. 7.8 3.9 -- -- -- 1.1 0.60 -- -- -- -- 0.60 -- Unit Note1)2)3)4)5) 6)7) Average periodic refresh Interval Auto-Refresh to Active/Auto-Refresh command period Precharge-All (4 banks) command period Precharge-All (8 banks) command period Read preamble Read postamble Active bank A to Active bank B command period Internal Read to Precharge command delay Write preamble Write postamble Write recovery time for write without AutoPrecharge Write recovery time for write with AutoPrecharge Internal Write to Read command delay Exit power down to any valid command (other than NOP or Deselect) Exit active power-down mode to Read command (slow exit, lower power) Exit precharge power-down to any valid command (other than NOP or Deselect) Exit Self-Refresh to non-Read command Exit Self-Refresh to Read command tREFI tRFC tRP tRP tRPRE tRPST tRRD tRTP tWPRE tWPST tWR WR -- -- 105 s s ns ns ns 14)15) 16)18) 17) tRP + 1tCK 15 + 1tCK 0.9 0.40 7.5 10 7.5 0.25 x tCK 0.40 15 -- -- 14) 14) 14)18) 16)20) tCK tCK ns ns ns -- -- 19) tCK tCK ns -- 20) tWR/tCK 7.5 2 6 - AL 2 -- -- -- -- -- -- tCK ns tWTR tXARD tXARDS tXP tXSNR tXSRD 21) 22) tCK tCK tCK ns 22) -- -- -- tRFC +10 200 tCK 1) For details and notes see the relevant Qimonda component data sheet 2) VDDQ = 1.8 V 0.1 V; VDD = 1.8 V 0.1 V. See notes 5)6)7)8) 3) Timing that is not specified is illegal and after such an event, in order to guarantee proper operation, the DRAM must be powered down and then restarted through the specified initialization sequence before normal operation can continue. 4) Timings are guaranteed with CK/CK differential Slew Rate of 2.0 V/ns. For DQS signals timings are guaranteed with a differential Slew Rate of 2.0 V/ns in differential strobe mode and a Slew Rate of 1 V/ns in single ended mode. 5) The CK / CK input reference level (for timing reference to CK / CK) is the point at which CK and CK cross. The DQS / DQS, RDQS/ RDQS, input reference level is the crosspoint when in differential strobe mode. 6) Inputs are not recognized as valid until VREF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ is recognized as low. 7) The output timing reference voltage level is VTT. 8) For each of the terms, if not already an integer, round to the next highest integer. tCK refers to the application clock period. WR refers to the WR parameter stored in the MR. 9) The clock frequency is allowed to change during self-refresh mode or precharge power-down mode. 10) For timing definition, refer to the Component data sheet. 11) Consists of data pin skew and output pattern effects, and p-channel to n-channel variation of the output drivers as well as output Slew Rate mis-match between DQS / DQS and associated DQ in any given cycle. 12) MIN (tCL, tCH) refers to the smaller of the actual clock low time and the actual clock high time as provided to the device (i.e. this value can be greater than the minimum specification limits for tCL and tCH). Rev. 1.1, 2007-01 08212006-PKYN-2H1B 25 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 13) The tHZ, tRPST and tLZ, tRPRE parameters are referenced to a specific voltage level, which specify when the device output is no longer driving (tHZ, tRPST), or begins driving (tLZ, tRPRE). tHZ and tLZ transitions occur in the same access time windows as valid data transitions.These parameters are verified by design and characterization, but not subject to production test. 14) The Auto-Refresh command interval has be reduced to 3.9 s when operating the DDR2 DRAM in a temperature range between 85 C and 95 C. 15) 0 C TCASE 85 C 16) 85 C < TCASE 95 C 17) A maximum of eight Auto-Refresh commands can be posted to any given DDR2 SDRAM device. 18) The tRRD timing parameter depends on the page size of the DRAM organization. See Table 2 "Ordering Information for RoHS Compliant Products" on Page 4. 19) The maximum limit for the tWPST parameter is not a device limit. The device operates with a greater value for this parameter, but system performance (bus turnaround) degrades accordingly. 20) WR must be programmed to fulfill the minimum requirement for the tWR timing parameter, where WRMIN[cycles] = tWR(ns)/tCK(ns) rounded up to the next integer value. tDAL = WR + (tRP/tCK). For each of the terms, if not already an integer, round to the next highest integer. tCK refers to the application clock period. WR refers to the WR parameter stored in the MRS. 21) Minimum tWTR is two clocks when operating the DDR2-SDRAM at frequencies 200 z. 22) User can choose two different active power-down modes for additional power saving via MRS address bit A12. In "standard active powerdown mode" (MR, A12 = "0") a fast power-down exit timing tXARD can be used. In "low active power-down mode" (MR, A12 ="1") a slow power-down exit timing tXARDS has to be satisfied. 3.3.3 ODT AC Electrical Characteristics TABLE 18 ODT AC Character. and Operating Conditions for DDR2-667 & DDR2-800 ODT AC Character. and Opeating Conditions: Table 18- DDR2-667 &DDR2-800 and Table 19- DDR2-533C & DDR2-400B Symbol Parameter / Condition Values Min. Max. 2 Unit Note tAOND tAON tAONPD tAOFD tAOF tAOFPD tANPD tAXPD ODT turn-on delay ODT turn-on ODT turn-on (Power-Down Modes) ODT turn-off delay ODT turn-off ODT turn-off (Power-Down Modes) ODT to Power Down Mode Entry Latency ODT Power Down Exit Latency 2 nCK ns ns nCK ns ns nCK nCK 1) 1)2) 1) 1) 1)3) 1) 1) 1) tAC.MIN tAC.MIN + 2 ns 2.5 tAC.MAX + 0.7 ns 2 tCK + tAC.MAX + 1 ns 2.5 tAC.MIN tAC.MIN + 2 ns 3 8 tAC.MAX + 0.6 ns 2.5 tCK + tAC.MAX + 1 ns -- -- 1) New units, 'tCK.AVG' and 'nCK', are introduced in DDR2-667 and DDR2-800. Unit 'tCK.AVG' represents the actual tCK.AVG of the input clock under operation. Unit 'nCK' represents one clock cycle of the input clock, counting the actual clock edges. Note that in DDR2-400 and DDR2-533, 'tCK' is used for both concepts. Example: tXP = 2 [nCK] means; if Power Down exit is registered at Tm, an Active command may be registered at Tm + 2, even if (Tm + 2 - Tm) is 2 x tCK.AVG+ tEPR.2PER(MIN). 2) ODT turn on time min is when the device leaves high impedance and ODT resistance begins to turn on. ODT turn on time max is when the ODT resistance is fully on. Both are measured from tAOND, which is interpreted differently per speed bin. For DDR2-667/800, tAOND is 2 clock cycles after the clock edge that registered a first ODT HIGH counting the actual input clock edges. 3) ODT turn off time min. is when the device starts to turn off ODT resistance. ODT turn off time max is when the bus is in high impedance. Both are measured from tAOFD. Both are measured from tAOFD, which is interpreted differently per speed bin. For DDR2-667/800,if tCK.AVG = 3 ns is assumed, tAOFD= 1.5 ns (0.5 x 3 ns) after the second trailing clock edge counting from the clock edge that registered a first ODT LOW and by counting the actual input clock edge. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 26 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 19 ODT AC Character. and Operating Conditions for DDR2-533 & DDR2-400 Symbol Parameter / Condition Values Min. Max. 2 Unit Note tAOND tAON tAONPD tAOFD tAOF tAOFPD tANPD tAXPD ODT turn-on delay ODT turn-on ODT turn-on (Power-Down Modes) ODT turn-off delay ODT turn-off ODT turn-off (Power-Down Modes) ODT to Power Down Mode Entry Latency ODT Power Down Exit Latency 2 tCK ns ns -- 1) tAC.MIN tAC.MIN + 2 ns 2.5 tAC.MAX + 1 ns 2 tCK + tAC.MAX + 1 ns 2.5 -- -- 2) tCK ns ns tAC.MIN tAC.MIN + 2 ns 3 8 tAC.MAX + 0.6 ns 2.5 tCK + tAC.MAX + 1 ns -- -- -- -- -- tCK tCK 1) ODT turn on time min is when the device leaves high impedance and ODT resistance begins to turn on. ODT turn on time max is when the ODT resistance is fully on. Both are measured from tAOND, which is interpreted differently per speed bin. For DDR2-400/533, tAOND is 10 ns (= 2 x 5 ns) after the clock edge that registered a first ODT HIGH if tCK = 5 ns. 2) ODT turn off time min. is when the device starts to turn off ODT resistance. ODT turn off time max is when the bus is in high impedance. Both are measured from tAOFD. Both are measured from tAOFD, which is interpreted differently per speed bin. For DDR2-400/533, tAOFD is 12.5 ns (= 2.5 x 5 ns) after the clock edge that registered a first ODT HIGH if tCK = 5 ns. Rev. 1.1, 2007-01 08212006-PKYN-2H1B 27 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 3.4 IDD Specifications and Conditions List of tables defining IDD Specifications and Conditions. * Table 20 "IDD Measurement Conditions" on Page 28 * Table 21 "Definitions for IDD" on Page 29 * Table 22 "IDD Specification for HYS64T[32/64/128]xxxEDL-25F-B2" on Page 30 * Table 23 "IDD Specification for HYS64T[32/64/128]xxxEDL-2.5-B2" on Page 31 * Table 24 "IDD Specification for HYS64T[32/64/128]xxxEDL-3-B2" on Page 32 * Table 25 "IDD Specification for HYS64T[32/64/128]xxxEDL-3S-B2" on Page 33 * Table 26 "IDD Specification for HYS64T[32/64/128]xxxEDL-3.7-B2" on Page 34 TABLE 20 IDD Measurement Conditions Parameter Symbol Note 1)2)3)4)5) Operating Current 0 IDD0 One bank Active - Precharge; tCK = tCK.MIN, tRC = tRC.MIN, tRAS = tRAS.MIN, CKE is HIGH, CS is HIGH between valid commands. Address and control inputs are SWITCHING, Databus inputs are SWITCHING. Operating Current 1 One bank Active - Read - Precharge; IOUT = 0 mA, BL = 4, tCK = tCK.MIN, tRC = tRC.MIN, tRAS = tRAS.MIN, tRCD = tRCD.MIN, AL = 0, CL = CLMIN; CKE is HIGH, CS is HIGH between valid commands. Address and control inputs are SWITCHING, Databus inputs are SWITCHING. -- IDD1 6) Precharge Standby Current IDD2N All banks idle; CS is HIGH; CKE is HIGH; tCK = tCK.MIN; Other control and address inputs are SWITCHING, Databus inputs are SWITCHING. Precharge Power-Down Current Other control and address inputs are STABLE, Data bus inputs are FLOATING. Precharge Quiet Standby Current All banks idle; CS is HIGH; CKE is HIGH; tCK = tCK.MIN; Other control and address inputs are STABLE, Data bus inputs are FLOATING. Active Standby Current Burst Read: All banks open; Continuous burst reads; BL = 4; AL = 0, CL = CLMIN; tCK = tCK.MIN; tRAS = tRAS.MAX, tRP = tRP.MIN; CKE is HIGH, CS is HIGH between valid commands. Address inputs are SWITCHING; Data Bus inputs are SWITCHING; IOUT = 0 mA. -- IDD2P IDD2Q -- -- IDD3N -- Active Power-Down Current IDD3P(0) All banks open; tCK = tCK.MIN, CKE is LOW; Other control and address inputs are STABLE, Data bus inputs are FLOATING. MRS A12 bit is set to LOW (Fast Power-down Exit); Active Power-Down Current IDD3P(1) All banks open; tCK = tCK.MIN, CKE is LOW; Other control and address inputs are STABLE, Data bus inputs are FLOATING. MRS A12 bit is set to HIGH (Slow Power-down Exit); -- -- IDD4R Operating Current - Burst Read All banks open; Continuous burst reads; BL = 4; AL = 0, CL = CLMIN; tCK = tCKMIN; tRAS = tRASMAX; tRP = tRPMIN; CKE is HIGH, CS is HIGH between valid commands; Address inputs are SWITCHING; Data bus inputs are SWITCHING; IOUT = 0mA. Operating Current - Burst Write All banks open; Continuous burst writes; BL = 4; AL = 0, CL = CLMIN; tCK = tCK.MIN; tRAS = tRAS.MAX., tRP = tRP.MAX; CKE is HIGH, CS is HIGH between valid commands. Address inputs are SWITCHING; Data Bus inputs are SWITCHING; 6) IDD4W -- Rev. 1.1, 2007-01 08212006-PKYN-2H1B 28 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Parameter Burst Refresh Current tCK = tCK.MIN., Refresh command every tRFC = tRFC.MIN interval, CKE is HIGH, CS is HIGH between valid commands, Other control and address inputs are SWITCHING, Data bus inputs are SWITCHING. Distributed Refresh Current Symbol Note 1)2)3)4)5) IDD5B -- tCK = tCK.MIN., Refresh command every tRFC = tREFI interval, CKE is LOW and CS is HIGH between valid commands, Other control and address inputs are SWITCHING, Data bus inputs are SWITCHING. IDD5D -- Self-Refresh Current IDD6 CKE 0.2 V; external clock off, CK and CK at 0 V; Other control and address inputs are FLOATING, Data bus inputs are FLOATING. IDD6 current values are guaranteed up to TCASE of 85 C max. -- IDD7 All Bank Interleave Read Current All banks are being interleaved at minimum tRC without violating tRRD using a burst length of 4. Control and address bus inputs are STABLE during DESELECTS. Iout = 0 mA. 1) VDDQ = 1.8 V 0.1 V; VDD = 1.8 V 0.1 V 2) IDD specifications are tested after the device is properly initialized and IDD parameter are specified with ODT disabled. 3) Definitions for IDD see Table 3 4) For two rank modules: for all active current measurements the other rank is in Precharge Power-Down Mode IDD2P 6) 5) For details and notes see the relevant Qimonda component data sheet 6) IDD1, IDD4R and IDD7 current measurements are defined with the outputs disabled (IOUT = 0 mA). To achieve this on module level the output buffers can be disabled using an EMRS(1) (Extended Mode Register Command) by setting A12 bit to HIGH. TABLE 21 Definitions for IDD Parameter LOW STABLE FLOATING SWITCHING Description VIN VIL(ac).MAX, HIGH is defined as VIN VIH(ac).MIN Inputs are stable at a HIGH or LOW level Inputs are VREF = VDDQ /2 Inputs are changing between HIGH and LOW every other clock (once per 2 cycles) for address and control signals, and inputs changing between HIGH and LOW every other data transfer (once per cycle) for DQ signals not including mask or strobes Rev. 1.1, 2007-01 08212006-PKYN-2H1B 29 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 22 IDD Specification for HYS64T[32/64/128]xxxEDL-25F-B2 HYS64T128021EDL-25FB2 HYS64T128921EDL-25FB2 HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 HYS64T64920EDL-25F-B2 Product Type Unit Note1) Organization 256 MB 1 Rank x 64 -25F 512 MB 2 Ranks x 64 -25F Max. 456 516 408 72 360 480 312 104 756 836 616 88 40 1 GB 2 Ranks x 64 -25F Max. 744 872 816 144 720 960 624 208 1312 1312 1232 176 80 mA mA mA mA mA mA mA mA mA mA mA mA mA 2) 2) 3) 3) 3) 3) 4)3) 5)3) 2) 2) 2) 3)6) 3)6) 2) Symbol Max. 420 480 204 36 180 240 156 52 720 800 580 44 24 1060 1096 1432 mA 1) Calculated values from component data. ODT disabled. IDD1, IDD4R, and IDD7, are defined with the outputs disabled. 2) The other rank is in IDD2P Precharge Power-Down Current mode 3) Both ranks are in the same IDD current mode 4) Fast: MRS(12)=0 5) Slow: MRS(12)=1 6) IDD5D and IDD6 values are for 0C TCase 85C IDD0 IDD1 IDD2N IDD2P IDD2Q IDD3N IDD3P_0 (fast) IDD3P_1 (slow) IDD4R IDD4W IDD5B IDD5D IDD6 IDD7 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 30 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 23 IDD Specification for HYS64T[32/64/128]xxxEDL-2.5-B2 HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 HYS64T64920EDL-2.5-B2 HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 Product Type Unit Note1) Organization 256 MB 1 Rank x 64 -2.5 512 MB 2 Ranks x 64 -2.5 Max. 436 496 408 72 360 480 312 104 756 836 616 88 40 1 GB 2 Ranks x 64 -2.5 Max. 712 832 816 144 720 960 624 208 1312 1312 1232 176 80 mA mA mA mA mA mA mA mA mA mA mA mA mA 2) 2) 3) 3) 3) 3) 4)3) 5)3) 2) 2) 2) 3)6) 3)6) 2) Symbol Max. 400 460 204 36 180 240 156 52 720 800 580 44 24 1020 1056 1352 mA 1) Calculated values from component data. ODT disabled. IDD1, IDD4R, and IDD7, are defined with the outputs disabled. 2) The other rank is in IDD2P Precharge Power-Down Current mode 3) Both ranks are in the same IDD current mode 4) Fast: MRS(12)=0 5) Slow: MRS(12)=1 6) IDD5D and IDD6 values are for 0C TCase 85C IDD0 IDD1 IDD2N IDD2P IDD2Q IDD3N IDD3P_0 (fast) IDD3P_1 (slow) IDD4R IDD4W IDD5B IDD5D IDD6 IDD7 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 31 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 24 IDD Specification for HYS64T[32/64/128]xxxEDL-3-B2 HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 HYS64T64920EDL-3-B2 Product Type HYS64T128021EDL-3-B2 HYS64T128921EDL-3-B2 Unit Note1) Organization 256 MB 1 Rank x 64 -3 512 MB 2 Ranks x 64 -3 Max. 416 456 360 72 320 400 264 104 656 716 596 88 40 1 GB 2 Ranks x 64 -3 Max. 672 792 720 144 640 800 528 208 1112 1112 1192 176 80 mA mA mA mA mA mA mA mA mA mA mA mA mA 2) 2) 3) 3) 3) 3) 3)4) 3)5) 2) 2) 2) 3)6) 3)6) 2) Symbol Max. 380 420 180 36 160 200 132 52 620 680 560 44 24 1008 1044 1352 mA 1) Calculated values from component data. ODT disabled. IDD1, IDD4R, and IDD7, are defined with the outputs disabled. 2) The other rank is in IDD2P Precharge Power-Down Current mode 3) Both ranks are in the same IDD current mode 4) Fast: MRS(12)=0 5) Slow: MRS(12)=1 6) IDD5D and IDD6 values are for 0C TCase 85C IDD0 IDD1 IDD2N IDD2P IDD2Q IDD3N IDD3P_0 (fast) IDD3P_1 (slow) IDD4R IDD4W IDD5B IDD5D IDD6 IDD7 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 32 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 25 IDD Specification for HYS64T[32/64/128]xxxEDL-3S-B2 HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 HYS64T64920EDL-3S-B2 Product Type HYS64T128021EDL-3S-B2 HYS64T128921EDL-3S-B2 Unit Note1) Organization 256 MB 1 Rank x 64 -3S 512 MB 2 Ranks x 64 -3S Max. 396 436 360 72 320 400 264 104 656 716 596 88 40 1 GB 2 Ranks x 64 -3S Max. 640 752 720 144 640 800 528 208 1112 1112 1192 176 80 mA mA mA mA mA mA mA mA mA mA mA mA mA 2) 2) 3) 3) 3) 3) 4)3) 5)3) 2) 2) 2) 3)6) 3)6) 2) Symbol Max. 360 400 180 36 160 200 132 52 620 680 560 44 24 960 996 1288 mA 1) Calculated values from component data. ODT disabled. IDD1, IDD4R, and IDD7, are defined with the outputs disabled. 2) The other rank is in IDD2P Precharge Power-Down Current mode 3) Both ranks are in the same IDD current mode 4) Fast: MRS(12)=0 5) Slow: MRS(12)=1 6) IDD5D and IDD6 values are for 0C TCase 85C IDD0 IDD1 IDD2N IDD2P IDD2Q IDD3N IDD3P_0 (fast) IDD3P_1 (slow) IDD4R IDD4W IDD5B IDD5D IDD6 IDD7 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 33 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 26 IDD Specification for HYS64T[32/64/128]xxxEDL-3.7-B2 HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 HYS64T64920EDL-3.7-B2 HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 Product Type Unit Note1) Organization 256 MB 1 Rank x 64 -3.7 512 MB 2 Ranks x 64 -3.7 Max. 356 396 304 72 280 344 224 104 556 616 556 88 40 1 GB 2 Ranks x 64 -3.7 Max. 592 672 608 144 560 688 448 208 952 952 1112 176 80 mA mA mA mA mA mA mA mA mA mA mA mA mA 2) 2) 3) 3) 3) 3) 4)3) 5)3) 2) 2) 2) 3)6) 3)6) 2) Symbol Max. 320 360 152 36 140 172 112 52 520 580 520 44 24 920 956 1232 mA 1) Calculated values from component data. ODT disabled. IDD1, IDD4R, and IDD7, are defined with the outputs disabled. 2) The other rank is in IDD2P Precharge Power-Down Current mode 3) Both ranks are in the same IDD current mode 4) Fast: MRS(12)=0 5) Slow: MRS(12)=1 6) IDD5D and IDD6 values are for 0C TCase 85C IDD0 IDD1 IDD2N IDD2P IDD2Q IDD3N IDD3P_0 (fast) IDD3P_1 (slow) IDD4R IDD4W IDD5B IDD5D IDD6 IDD7 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 34 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 4 SPD Codes This chapter lists all hexadecimal byte values stored in the EEPROM of the products described in this data sheet. SPD stands for serial presence detect. All values with XX in the table are module specific bytes which are defined during production. List of SPD Code Tables * * * * * * * * * * Table 27 "HYS64T[32/64]xx0EDL-25F-B2" on Page 35 Table 28 "HYS64T128x21EDL-25FB2" on Page 40 Table 29 "HYS64T[32/64]xx0EDL-2.5-B2" on Page 44 Table 30 "HYS64T128x21EDL-2.5B2" on Page 49 Table 31 "HYS64T[32/64]xx0EDL-3-B2" on Page 53 Table 32 "HYS64T128x21EDL-3-B2" on Page 58 Table 33 "HYS64T[32/64]xx0EDL-3S-B2" on Page 62 Table 34 "HYS64T128x21EDL-3S-B2" on Page 67 Table 35 "HYS64T[32/64]xx0EDL-3.7-B2" on Page 71 Table 36 "HYS64T128x21EDL-3.7B2" on Page 76 TABLE 27 HYS64T[32/64]xx0EDL-25F-B2 HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 Product Type HYS64T64920EDL-25F-B2 512MB x64 2 Ranks (x16) PC2- 6400S-555 Rev. 1.2 HEX 80 08 08 0D 0A 61 Organization 256MB x64 256MB x64 512MB x64 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information PC2- 6400S-555 Rev. 1.2 HEX 80 08 08 0D 0A 60 PC2- 6400S-555 Rev. 1.2 HEX 80 08 08 0D 0A 60 PC2- 6400S-555 Rev. 1.2 HEX 80 08 08 0D 0A 61 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 35 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-555 Rev. 1.2 HEX 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 28 32 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Description Data Width Not used Interface Voltage Level PC2- 6400S-555 Rev. 1.2 HEX 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 28 32 PC2- 6400S-555 Rev. 1.2 HEX 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 28 32 PC2- 6400S-555 Rev. 1.2 HEX 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 28 32 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 36 HYS64T64920EDL-25F-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-555 Rev. 1.2 HEX 2D 40 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 56 7A 7F 3B 36 2E 5A 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Description PC2- 6400S-555 Rev. 1.2 HEX 2D 40 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 56 7A 7F 3B 36 2E 5A PC2- 6400S-555 Rev. 1.2 HEX 2D 40 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 56 7A 7F 3B 36 2E 5A PC2- 6400S-555 Rev. 1.2 HEX 2D 40 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 56 7A 7F 3B 36 2E 5A tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 37 HYS64T64920EDL-25F-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-555 Rev. 1.2 HEX 2A 68 22 3D 00 00 00 00 12 55 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 36 34 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 Description T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 PC2- 6400S-555 Rev. 1.2 HEX 2A 68 22 3D 00 00 00 00 12 54 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 33 32 PC2- 6400S-555 Rev. 1.2 HEX 2A 68 22 3D 00 00 00 00 12 54 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 33 32 PC2- 6400S-555 Rev. 1.2 HEX 2A 68 22 3D 00 00 00 00 12 55 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 36 34 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 38 HYS64T64920EDL-25F-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-25F-B2 HYS64T32900EDL-25F-B2 HYS64T64020EDL-25F-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-555 Rev. 1.2 HEX 39 32 30 45 44 4C 32 35 46 42 32 20 20 0x xx xx xx xx 00 FF 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 - 98 128 255 Description Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number Blank for customer use PC2- 6400S-555 Rev. 1.2 HEX 30 30 30 45 44 4C 32 35 46 42 32 20 20 3x xx xx xx xx 00 FF PC2- 6400S-555 Rev. 1.2 HEX 39 30 30 45 44 4C 32 35 46 42 32 20 20 0x xx xx xx xx 00 FF PC2- 6400S-555 Rev. 1.2 HEX 30 32 30 45 44 4C 32 35 46 42 32 20 20 3x xx xx xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 39 HYS64T64920EDL-25F-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 28 HYS64T128x21EDL-25FB2 Product Type Organization HYS64T128021EDL- 25FB2 1 GByte x64 2 Ranks (x8) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2-6400S-555 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 1E HYS64T128921EDL- 25FB2 1 GByte x64 2 Ranks (x8) PC2-6400S-555 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00 0C 04 70 01 04 00 07 25 40 3D 50 32 1E tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 40 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL- 25FB2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL- 25FB2 1 GByte x64 2 Ranks (x8) PC2-6400S-555 Rev. 1.2 HEX 32 2D 80 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 50 7A 5F 3B 36 2E 5A 2A 5A 22 27 00 00 00 Label Code JEDEC SPD Revision Byte# 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Description PC2-6400S-555 Rev. 1.2 HEX 32 2D 80 17 25 05 12 3C 1E 1E 00 30 39 69 80 14 1E 00 50 7A 5F 3B 36 2E 5A 2A 5A 22 27 00 00 00 tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 41 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL- 25FB2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL- 25FB2 1 GByte x64 2 Ranks (x8) PC2-6400S-555 Rev. 1.2 HEX 00 12 3A 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 39 32 31 45 44 4C 32 35 46 42 32 20 0x xx Label Code JEDEC SPD Revision Byte# 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 Description TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code PC2-6400S-555 Rev. 1.2 HEX 00 12 3A 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 30 32 31 45 44 4C 32 35 46 42 32 20 3x xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 42 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL- 25FB2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL- 25FB2 1 GByte x64 2 Ranks (x8) PC2-6400S-555 Rev. 1.2 HEX xx xx xx 00 FF Label Code JEDEC SPD Revision Byte# 93 94 95 - 98 128 255 Description Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number Blank for customer use PC2-6400S-555 Rev. 1.2 HEX xx xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 43 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 29 HYS64T[32/64]xx0EDL-2.5-B2 HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 Product Type HYS64T64920EDL-2.5-B2 512MB x64 2 Ranks (x16) PC2- 6400S-666 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 Organization 256MB x64 256MB x64 512MB x64 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2- 6400S-666 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 PC2- 6400S-666 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 PC2- 6400S-666 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 25 40 00 82 10 00 00 0C 04 70 01 04 00 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Rev. 1.1, 2007-01 08212006-PKYN-2H1B 44 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-666 Rev. 1.2 HEX 07 30 45 3D 50 3C 28 3C 2D 40 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Description Component Attributes PC2- 6400S-666 Rev. 1.2 HEX 07 30 45 3D 50 3C 28 3C 2D 40 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E PC2- 6400S-666 Rev. 1.2 HEX 07 30 45 3D 50 3C 28 3C 2D 40 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E PC2- 6400S-666 Rev. 1.2 HEX 07 30 45 3D 50 3C 28 3C 2D 40 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 45 HYS64T64920EDL-2.5-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-666 Rev. 1.2 HEX 00 56 7A 77 3B 36 2E 5A 2A 68 22 3B 00 00 00 00 12 42 7F 7F 7F 7F 7F 51 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Description PLL Relock Time PC2- 6400S-666 Rev. 1.2 HEX 00 56 7A 77 3B 36 2E 5A 2A 68 22 3B 00 00 00 00 12 41 7F 7F 7F 7F 7F 51 PC2- 6400S-666 Rev. 1.2 HEX 00 56 7A 77 3B 36 2E 5A 2A 68 22 3B 00 00 00 00 12 41 7F 7F 7F 7F 7F 51 PC2- 6400S-666 Rev. 1.2 HEX 00 56 7A 77 3B 36 2E 5A 2A 68 22 3B 00 00 00 00 12 42 7F 7F 7F 7F 7F 51 TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 46 HYS64T64920EDL-2.5-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-666 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 39 32 30 45 44 4C 32 2E 35 42 32 20 20 0x xx xx 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 Description Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year PC2- 6400S-666 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 30 30 30 45 44 4C 32 2E 35 42 32 20 20 3x xx xx PC2- 6400S-666 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 39 30 30 45 44 4C 32 2E 35 42 32 20 20 0x xx xx PC2- 6400S-666 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 30 32 30 45 44 4C 32 2E 35 42 32 20 20 3x xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 47 HYS64T64920EDL-2.5-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-2.5-B2 HYS64T32900EDL-2.5-B2 HYS64T64020EDL-2.5-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 6400S-666 Rev. 1.2 HEX xx xx 00 FF 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 94 95 - 98 128 255 Description Module Manufacturing Date Week Module Serial Number Blank for customer use PC2- 6400S-666 Rev. 1.2 HEX xx xx 00 FF PC2- 6400S-666 Rev. 1.2 HEX xx xx 00 FF PC2- 6400S-666 Rev. 1.2 HEX xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 48 HYS64T64920EDL-2.5-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 30 HYS64T128x21EDL-2.5B2 Product Type Organization HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 1 GByte x64 2 Ranks (x8) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2-6400S-666 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00 0C 04 70 01 04 00 07 30 45 3D 50 3C 1E 3C 1 GByte x64 2 Ranks (x8) PC2-6400S-666 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00 0C 04 70 01 04 00 07 30 45 3D 50 3C 1E 3C tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 49 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-6400S-666 Rev. 1.2 HEX 2D 80 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E 00 50 7A 5B 3B 36 2E 5A 2A 5A 22 25 00 00 00 00 12 Label Code JEDEC SPD Revision Byte# 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 Description PC2-6400S-666 Rev. 1.2 HEX 2D 80 17 25 05 12 3C 1E 1E 00 00 3C 69 80 14 1E 00 50 7A 5B 3B 36 2E 5A 2A 5A 22 25 00 00 00 00 12 tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Rev. 1.1, 2007-01 08212006-PKYN-2H1B 50 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-6400S-666 Rev. 1.2 HEX 2B 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 39 32 31 45 44 4C 32 2E 35 42 32 20 0x xx xx xx xx Label Code JEDEC SPD Revision Byte# 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 - 98 Description Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number PC2-6400S-666 Rev. 1.2 HEX 2B 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 30 32 31 45 44 4C 32 2E 35 42 32 20 3x xx xx xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 51 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-2.5B2 HYS64T128921EDL-2.5B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-6400S-666 Rev. 1.2 HEX 00 FF Label Code JEDEC SPD Revision Byte# 128 255 Description Blank for customer use PC2-6400S-666 Rev. 1.2 HEX 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 52 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 31 HYS64T[32/64]xx0EDL-3-B2 HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 Product Type HYS64T64920EDL-3-B2 512MB x64 2 Ranks (x16) PC2- 5300S-444 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 Organization 256MB x64 256MB x64 512MB x64 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2- 5300S-444 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 PC2- 5300S-444 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 PC2- 5300S-444 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Rev. 1.1, 2007-01 08212006-PKYN-2H1B 53 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-444 Rev. 1.2 HEX 07 30 45 50 60 30 28 30 2D 40 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 Description Component Attributes PC2- 5300S-444 Rev. 1.2 HEX 07 30 45 50 60 30 28 30 2D 40 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 PC2- 5300S-444 Rev. 1.2 HEX 07 30 45 50 60 30 28 30 2D 40 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 PC2- 5300S-444 Rev. 1.2 HEX 07 30 45 50 60 30 28 30 2D 40 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time Rev. 1.1, 2007-01 08212006-PKYN-2H1B 54 HYS64T64920EDL-3-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-444 Rev. 1.2 HEX 54 7A 6F 34 36 27 4C 2A 5A 20 3A 00 00 00 00 12 0E 7F 7F 7F 7F 7F 51 00 00 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 Description PC2- 5300S-444 Rev. 1.2 HEX 54 7A 6F 34 36 27 4C 2A 5A 20 3A 00 00 00 00 12 0D 7F 7F 7F 7F 7F 51 00 00 PC2- 5300S-444 Rev. 1.2 HEX 54 7A 6F 34 36 27 4C 2A 5A 20 3A 00 00 00 00 12 0D 7F 7F 7F 7F 7F 51 00 00 PC2- 5300S-444 Rev. 1.2 HEX 54 7A 6F 34 36 27 4C 2A 5A 20 3A 00 00 00 00 12 0E 7F 7F 7F 7F 7F 51 00 00 TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 55 HYS64T64920EDL-3-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-444 Rev. 1.2 HEX xx 36 34 54 36 34 39 32 30 45 44 4C 33 42 32 20 20 20 20 0x xx xx xx xx 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 - 98 Description Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number PC2- 5300S-444 Rev. 1.2 HEX xx 36 34 54 33 32 30 30 30 45 44 4C 33 42 32 20 20 20 20 2x xx xx xx xx PC2- 5300S-444 Rev. 1.2 HEX xx 36 34 54 33 32 39 30 30 45 44 4C 33 42 32 20 20 20 20 0x xx xx xx xx PC2- 5300S-444 Rev. 1.2 HEX xx 36 34 54 36 34 30 32 30 45 44 4C 33 42 32 20 20 20 20 2x xx xx xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 56 HYS64T64920EDL-3-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3-B2 HYS64T32900EDL-3-B2 HYS64T64020EDL-3-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-444 Rev. 1.2 HEX 00 FF 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 128 255 Description Blank for customer use PC2- 5300S-444 Rev. 1.2 HEX 00 FF PC2- 5300S-444 Rev. 1.2 HEX 00 FF PC2- 5300S-444 Rev. 1.2 HEX 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 57 HYS64T64920EDL-3-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 32 HYS64T128x21EDL-3-B2 Product Type Organization HYS64T128021EDL-3-B2 1 GByte x64 2 Ranks (x8) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2-5300S-444 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 04 38 01 04 00 07 30 45 50 60 30 1E 30 HYS64T128921EDL-3-B2 1 GByte x64 2 Ranks (x8) PC2-5300S-444 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 04 38 01 04 00 07 30 45 50 60 30 1E 30 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 58 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3-B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3-B2 1 GByte x64 2 Ranks (x8) PC2-5300S-444 Rev. 1.2 HEX 2D 80 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 50 7A 53 34 36 27 4C 2A 4C 20 25 00 00 00 00 12 Label Code JEDEC SPD Revision Byte# 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 Description PC2-5300S-444 Rev. 1.2 HEX 2D 80 20 27 10 17 3C 1E 1E 00 00 39 69 80 18 22 00 50 7A 53 34 36 27 4C 2A 4C 20 25 00 00 00 00 12 tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Rev. 1.1, 2007-01 08212006-PKYN-2H1B 59 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3-B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3-B2 1 GByte x64 2 Ranks (x8) PC2-5300S-444 Rev. 1.2 HEX FA 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 39 32 31 45 44 4C 33 42 32 20 20 20 0x xx xx xx xx Label Code JEDEC SPD Revision Byte# 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 - 98 Description Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number PC2-5300S-444 Rev. 1.2 HEX FA 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 30 32 31 45 44 4C 33 42 32 20 20 20 2x xx xx xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 60 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3-B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3-B2 1 GByte x64 2 Ranks (x8) PC2-5300S-444 Rev. 1.2 HEX 00 FF Label Code JEDEC SPD Revision Byte# 128 255 Description Blank for customer use PC2-5300S-444 Rev. 1.2 HEX 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 61 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 33 HYS64T[32/64]xx0EDL-3S-B2 HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 Product Type HYS64T64920EDL-3S-B2 512MB x64 2 Ranks (x16) PC2- 5300S-555 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 Organization 256MB x64 256MB x64 512MB x64 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2- 5300S-555 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 PC2- 5300S-555 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 PC2- 5300S-555 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 30 45 00 82 10 00 00 0C 04 38 01 04 00 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Rev. 1.1, 2007-01 08212006-PKYN-2H1B 62 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-555 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Description Component Attributes PC2- 5300S-555 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 PC2- 5300S-555 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 PC2- 5300S-555 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 63 HYS64T64920EDL-3S-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-555 Rev. 1.2 HEX 00 54 7A 67 34 36 27 4C 2A 5A 20 38 00 00 00 00 12 37 7F 7F 7F 7F 7F 51 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Description PLL Relock Time PC2- 5300S-555 Rev. 1.2 HEX 00 54 7A 67 34 36 27 4C 2A 5A 20 38 00 00 00 00 12 36 7F 7F 7F 7F 7F 51 PC2- 5300S-555 Rev. 1.2 HEX 00 54 7A 67 34 36 27 4C 2A 5A 20 38 00 00 00 00 12 36 7F 7F 7F 7F 7F 51 PC2- 5300S-555 Rev. 1.2 HEX 00 54 7A 67 34 36 27 4C 2A 5A 20 38 00 00 00 00 12 37 7F 7F 7F 7F 7F 51 TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 64 HYS64T64920EDL-3S-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-555 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 39 32 30 45 44 4C 33 53 42 32 20 20 20 0x xx xx 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 Description Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year PC2- 5300S-555 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 30 30 30 45 44 4C 33 53 42 32 20 20 20 2x xx xx PC2- 5300S-555 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 39 30 30 45 44 4C 33 53 42 32 20 20 20 0x xx xx PC2- 5300S-555 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 30 32 30 45 44 4C 33 53 42 32 20 20 20 2x xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 65 HYS64T64920EDL-3S-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3S-B2 HYS64T32900EDL-3S-B2 HYS64T64020EDL-3S-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 5300S-555 Rev. 1.2 HEX xx xx 00 FF 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 94 95 - 98 128 255 Description Module Manufacturing Date Week Module Serial Number Blank for customer use PC2- 5300S-555 Rev. 1.2 HEX xx xx 00 FF PC2- 5300S-555 Rev. 1.2 HEX xx xx 00 FF PC2- 5300S-555 Rev. 1.2 HEX xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 66 HYS64T64920EDL-3S-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 34 HYS64T128x21EDL-3S-B2 Product Type Organization HYS64T128021EDL-3S- B2 1 GByte x64 2 Ranks (x8) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2-5300S-555 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 04 38 01 04 00 07 3D 50 50 60 3C 1E HYS64T128921EDL-3S- B2 1 GByte x64 2 Ranks (x8) PC2-5300S-555 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 04 38 01 04 00 07 3D 50 50 60 3C 1E tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 67 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3S- B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3S- B2 1 GByte x64 2 Ranks (x8) PC2-5300S-555 Rev. 1.2 HEX 3C 2D 80 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 00 50 7A 4B 34 36 27 4C 2A 4C 20 23 00 00 00 Label Code JEDEC SPD Revision Byte# 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Description PC2-5300S-555 Rev. 1.2 HEX 3C 2D 80 20 27 10 17 3C 1E 1E 00 00 3C 69 80 18 22 00 50 7A 4B 34 36 27 4C 2A 4C 20 23 00 00 00 tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 68 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3S- B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3S- B2 1 GByte x64 2 Ranks (x8) PC2-5300S-555 Rev. 1.2 HEX 00 12 23 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 39 32 31 45 44 4C 33 53 42 32 20 20 0x xx Label Code JEDEC SPD Revision Byte# 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 Description TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code PC2-5300S-555 Rev. 1.2 HEX 00 12 23 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 30 32 31 45 44 4C 33 53 42 32 20 20 2x xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 69 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3S- B2 1 GByte x64 2 Ranks (x8) HYS64T128921EDL-3S- B2 1 GByte x64 2 Ranks (x8) PC2-5300S-555 Rev. 1.2 HEX xx xx xx 00 FF Label Code JEDEC SPD Revision Byte# 93 94 95 - 98 128 255 Description Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number Blank for customer use PC2-5300S-555 Rev. 1.2 HEX xx xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 70 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 35 HYS64T[32/64]xx0EDL-3.7-B2 HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 Product Type HYS64T64920EDL-3.7-B2 512MB x64 2 Ranks (x16) PC2- 4200S-444 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 3D 50 00 82 10 00 00 0C 04 38 01 04 00 Organization 256MB x64 256MB x64 512MB x64 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2- 4200S-444 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 3D 50 00 82 10 00 00 0C 04 38 01 04 00 PC2- 4200S-444 Rev. 1.2 HEX 80 08 08 0D 0A 60 40 00 05 3D 50 00 82 10 00 00 0C 04 38 01 04 00 PC2- 4200S-444 Rev. 1.2 HEX 80 08 08 0D 0A 61 40 00 05 3D 50 00 82 10 00 00 0C 04 38 01 04 00 tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Rev. 1.1, 2007-01 08212006-PKYN-2H1B 71 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 4200S-444 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Description Component Attributes PC2- 4200S-444 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 PC2- 4200S-444 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 PC2- 4200S-444 Rev. 1.2 HEX 07 3D 50 50 60 3C 28 3C 2D 40 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 72 HYS64T64920EDL-3.7-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 4200S-444 Rev. 1.2 HEX 00 54 7A 5B 2C 36 21 41 2A 4C 1E 35 00 00 00 00 12 43 7F 7F 7F 7F 7F 51 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Description PLL Relock Time PC2- 4200S-444 Rev. 1.2 HEX 00 54 7A 5B 2C 36 21 41 2A 4C 1E 35 00 00 00 00 12 42 7F 7F 7F 7F 7F 51 PC2- 4200S-444 Rev. 1.2 HEX 00 54 7A 5B 2C 36 21 41 2A 4C 1E 35 00 00 00 00 12 42 7F 7F 7F 7F 7F 51 PC2- 4200S-444 Rev. 1.2 HEX 00 54 7A 5B 2C 36 21 41 2A 4C 1E 35 00 00 00 00 12 43 7F 7F 7F 7F 7F 51 TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 73 HYS64T64920EDL-3.7-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 4200S-444 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 39 32 30 45 44 4C 33 2E 37 42 32 20 20 0x xx xx 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 Description Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year PC2- 4200S-444 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 30 30 30 45 44 4C 33 2E 37 42 32 20 20 2x xx xx PC2- 4200S-444 Rev. 1.2 HEX 00 00 xx 36 34 54 33 32 39 30 30 45 44 4C 33 2E 37 42 32 20 20 0x xx xx PC2- 4200S-444 Rev. 1.2 HEX 00 00 xx 36 34 54 36 34 30 32 30 45 44 4C 33 2E 37 42 32 20 20 2x xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 74 HYS64T64920EDL-3.7-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules HYS64T32000EDL-3.7-B2 HYS64T32900EDL-3.7-B2 HYS64T64020EDL-3.7-B2 Product Type Organization 256MB x64 256MB x64 512MB x64 512MB x64 2 Ranks (x16) PC2- 4200S-444 Rev. 1.2 HEX xx xx 00 FF 1 Rank (x16) 1 Rank (x16) 2 Ranks (x16) Label Code JEDEC SPD Revision Byte# 94 95 - 98 128 255 Description Module Manufacturing Date Week Module Serial Number Blank for customer use PC2- 4200S-444 Rev. 1.2 HEX xx xx 00 FF PC2- 4200S-444 Rev. 1.2 HEX xx xx 00 FF PC2- 4200S-444 Rev. 1.2 HEX xx xx 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 75 HYS64T64920EDL-3.7-B2 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules TABLE 36 HYS64T128x21EDL-3.7B2 Product Type Organization HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 1 GByte x64 2 Ranks (x8) Label Code JEDEC SPD Revision Byte# 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Description Programmed SPD Bytes in EEPROM Total number of Bytes in EEPROM Memory Type (DDR2) Number of Row Addresses Number of Column Addresses DIMM Rank and Stacking Information Data Width Not used Interface Voltage Level PC2-4200S-444 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 3D 50 00 82 08 00 00 0C 04 38 01 04 00 07 3D 50 50 60 3C 1E 3C 1 GByte x64 2 Ranks (x8) PC2-4200S-444 Rev. 1.2 HEX 80 08 08 0E 0A 61 40 00 05 3D 50 00 82 08 00 00 0C 04 38 01 04 00 07 3D 50 50 60 3C 1E 3C tCK @ CLMAX (Byte 18) [ns] tAC SDRAM @ CLMAX (Byte 18) [ns] Error Correction Support (non-ECC, ECC) Refresh Rate and Type Primary SDRAM Width Error Checking SDRAM Width Not used Burst Length Supported Number of Banks on SDRAM Device Supported CAS Latencies DIMM Mechanical Characteristics DIMM Type Information DIMM Attributes Component Attributes tCK @ CLMAX -1 (Byte 18) [ns] tAC SDRAM @ CLMAX -1 [ns] tCK @ CLMAX -2 (Byte 18) [ns] tAC SDRAM @ CLMAX -2 [ns] tRP.MIN [ns] tRRD.MIN [ns] tRCD.MIN [ns] Rev. 1.1, 2007-01 08212006-PKYN-2H1B 76 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-4200S-444 Rev. 1.2 HEX 2D 80 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 00 50 7A 43 2C 36 21 41 2A 40 1E 22 00 00 00 00 12 Label Code JEDEC SPD Revision Byte# 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 Description PC2-4200S-444 Rev. 1.2 HEX 2D 80 25 37 10 22 3C 1E 1E 00 00 3C 69 80 1E 28 00 50 7A 43 2C 36 21 41 2A 40 1E 22 00 00 00 00 12 tRAS.MIN [ns] Module Density per Rank tAS.MIN and tCS.MIN [ns] tAH.MIN and tCH.MIN [ns] tDS.MIN [ns] tDH.MIN [ns] tWR.MIN [ns] tWTR.MIN [ns] tRTP.MIN [ns] Analysis Characteristics tRC and tRFC Extension tRC.MIN [ns] tRFC.MIN [ns] tCK.MAX [ns] tDQSQ.MAX [ns] tQHS.MAX [ns] PLL Relock Time TCASE.MAX Delta / T4R4W Delta Psi(T-A) DRAM T0 (DT0) T2N (DT2N, UDIMM) or T2Q (DT2Q, RDIMM) T2P (DT2P) T3N (DT3N) T3P.fast (DT3P fast) T3P.slow (DT3P slow) T4R (DT4R) / T4R4W Sign (DT4R4W) T5B (DT5B) T7 (DT7) Psi(ca) PLL Psi(ca) REG TPLL (DTPLL) TREG (DTREG) / Toggle Rate SPD Revision Rev. 1.1, 2007-01 08212006-PKYN-2H1B 77 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-4200S-444 Rev. 1.2 HEX 37 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 39 32 31 45 44 4C 33 2E 37 42 32 20 0x xx xx xx xx Label Code JEDEC SPD Revision Byte# 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 - 98 Description Checksum of Bytes 0-62 Manufacturer's JEDEC ID Code (1) Manufacturer's JEDEC ID Code (2) Manufacturer's JEDEC ID Code (3) Manufacturer's JEDEC ID Code (4) Manufacturer's JEDEC ID Code (5) Manufacturer's JEDEC ID Code (6) Manufacturer's JEDEC ID Code (7) Manufacturer's JEDEC ID Code (8) Module Manufacturer Location Product Type, Char 1 Product Type, Char 2 Product Type, Char 3 Product Type, Char 4 Product Type, Char 5 Product Type, Char 6 Product Type, Char 7 Product Type, Char 8 Product Type, Char 9 Product Type, Char 10 Product Type, Char 11 Product Type, Char 12 Product Type, Char 13 Product Type, Char 14 Product Type, Char 15 Product Type, Char 16 Product Type, Char 17 Product Type, Char 18 Module Revision Code Test Program Revision Code Module Manufacturing Date Year Module Manufacturing Date Week Module Serial Number PC2-4200S-444 Rev. 1.2 HEX 37 7F 7F 7F 7F 7F 51 00 00 xx 36 34 54 31 32 38 30 32 31 45 44 4C 33 2E 37 42 32 20 2x xx xx xx xx Rev. 1.1, 2007-01 08212006-PKYN-2H1B 78 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Product Type Organization HYS64T128021EDL-3.7B2 HYS64T128921EDL-3.7B2 1 GByte x64 2 Ranks (x8) 1 GByte x64 2 Ranks (x8) PC2-4200S-444 Rev. 1.2 HEX 00 FF Label Code JEDEC SPD Revision Byte# 128 255 Description Blank for customer use PC2-4200S-444 Rev. 1.2 HEX 00 FF 99 - 127 Not used Rev. 1.1, 2007-01 08212006-PKYN-2H1B 79 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 5 Package Outlines FIGURE 5 Package Outline Raw Card A L-DIM-200-31 Notes 1. Thermal Sensor (Optional) 2. SPD or Combidevice (if used then no Thermal Sensor needed) Rev. 1.1, 2007-01 08212006-PKYN-2H1B 80 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules FIGURE 6 Package Outline Raw Card C L-DIM-200-30 Notes 1. Drawing according to ISO 8015 2. Dimensions in mm 3. General tolerances +/- 0.15 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 81 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules FIGURE 7 Package Outline L-DIM-200-36 Notes 1. Drawing according to ISO 8015 2. Dimensions in mm 3. General tolerances +/- 0.15 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 82 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules 6 Product Type Nomenclature Qimonda's nomenclature uses simple coding combined with some propriatory coding. Table 37 provides examples for module and component product type number as well as the field number. The detailed field description together with possible values and coding explanation is listed for modules in Table 38 and for components in Table 39. TABLE 37 Nomenclature Fields and Examples Example for Field Number 1 Micro-DIMM DDR2 DRAM HYS HYB 2 64 18 3 T T 4 64/128 5 0 6 2 7 0 0 8 K A 9 M C 10 -5 -5 11 -A -- 512/1G 16 TABLE 38 DDR2 DIMM Nomenclature Field 1 2 3 4 Description Qimonda Module Prefix Module Data Width [bit] DRAM Technology Memory Density per I/O [Mbit]; Module Density1) Values HYS 64 72 T 32 64 128 256 512 5 6 7 8 9 Raw Card Generation Number of Module Ranks Product Variations Package, Lead-Free Status Module Type 0 .. 9 0, 2, 4 0 .. 9 A .. Z D M R U F Coding Constant Non-ECC ECC DDR2 256 MByte 512 MByte 1 GByte 2 GByte 4 GByte Look up table 1, 2, 4 Look up table Look up table SO-DIMM Micro-DIMM Registered Unbuffered Fully Buffered Rev. 1.1, 2007-01 08212006-PKYN-2H1B 83 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Field 10 Description Speed Grade Values -2.5F -2.5 -3 -3S -3.7 -5 Coding PC2-6400 5-5-5 PC2-6400 6-6-6 PC2-5300 4-4-4 PC2-5300 5-5-5 PC2-4200 4-4-4 PC2-3200 3-3-3 First Second 11 Die Revision -A -B 1) Multiplying "Memory Density per I/O" with "Module Data Width" and dividing by 8 for Non-ECC and 9 for ECC modules gives the overall module memory density in MBytes as listed in column "Coding". TABLE 39 DDR2 DRAM Nomenclature Field 1 2 3 4 Description Qimonda Component Prefix Interface Voltage [V] DRAM Technology Component Density [Mbit] Values HYB 18 T 256 512 1G 2G 5+6 Number of I/Os 40 80 16 7 8 9 10 Product Variations Die Revision Package, Lead-Free Status Speed Grade 0 .. 9 A B C F -25F -2.5 -3 -3S -3.7 -5 Coding Constant SSTL_18 DDR2 256 Mbit 512 Mbit 1 Gbit 2 Gbit x4 x8 x16 Look up table First Second FBGA, lead-containing FBGA, lead-free DDR2-800 5-5-5 DDR2-800 6-6-6 DDR2-667 4-4-4 DDR2-667 5-5-5 DDR2-533 4-4-4 DDR2-400 3-3-3 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 84 Internet Data Sheet HYS64T[32/64/128]xxxEDL-[25F/.../3.7](-)B2 Small Outlined DDR2 SDRAM Modules Table of Contents 1 1.1 1.2 2 2.1 3 3.1 3.2 3.3 3.3.1 3.3.2 3.3.3 3.4 4 5 6 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chip Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Timing Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speed Grade Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Timing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ODT AC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDD Specifications and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 13 14 15 15 17 26 28 SPD Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Product Type Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Rev. 1.1, 2007-01 08212006-PKYN-2H1B 85 Internet Data Sheet Edition 2007-01 Published by Qimonda AG Gustav-Heinemann-Ring 212 D-81739 Munchen, Germany (c) Qimonda AG 2007. All Rights Reserved. Legal Disclaimer The information given in this Internet Data Sheet shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Qimonda hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Qimonda Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Qimonda Office. Qimonda Components may only be used in life-support devices or systems with the express written approval of Qimonda, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. www.qimonda.com |
Price & Availability of HYS64T32X00EDL |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |